Water Filters and What They Do To Protect Your Health.

Water is a basic need for all kinds of people, we all need clean and pure water for our residential use. Water in an untreated or contaminated form is nothing short of a deadly disease carrier. Depending upon the kind of activities in the surrounding environment, the soil conditions and a lot of other uncontrollable factors, your water supply may be carrying a combination of chemicals, particles, organisms and even radiations which are not good for your health. The need for pure water was recognized way back and for several years now, there have been countless methods implemented for making water healthy and safe for consumption. A basic measure such as boiling to highly sophisticated machines, there is serious technology in place for water purification. In this article, we explain the different types of water filters systems for residential use.

Let’s understand some of these systems and see how each helps eradicate impurities from water.

Distillation: The most tried and tested method which has been going on for generations. Works by boiling the water and sending the vapors to a condenser which converts the vapor back into its original form with added purity. By doing this, the water loses a lot of its impurities right at the boiling stage. Where this method fails a little is the removal of certain stubborn chemicals that need other methods to be removed.

The Sediment Purification: this method is suitable when the water has more particles. it works by flowing the water through a sediment filter. The filter blocks particles and releases consumable water. While Sediment Purification is the best for killing particles but it is far from the best when it comes to eliminating chemicals and other minute impurities. When merged with another advanced purification designed to kill chemicals, it forms a comprehensive filtration system.

The Carbon Adsorption method: this system takes care of the failures of the sediment purification. The system uses activated carbon that traps both small and large particles. One can use different filtering materials depending on the level of water purity they require. 

Ultra Violet Systems: Ultraviolet rays are absolutely ruthless when it comes to eliminating germs and organics from water. A typical UV purification system either kills these unwanted contaminants or makes them completely harmless. The UV system gives effective results as it perfectly gets rid of organics. However, the system is not suitable for removing particles from the water.

Ceramic or candle purification: it is one of the traditional ways of water purification. It works by holding harmful and unnecessary chemicals in the water and give clean water. When you are after high purity of the water from the system, candle purification is not the way to go as much it is cost-effective.

Reverse Osmosis: Reverse Osmosis is the most comprehensive, reliable and effective technology for water purification. What makes it so powerful is its ability to remove the widest range of impurities which include bacteria, virus, chemicals, radiations, particles, organisms and a lot more. This extensiveness is not offered by any other technique. When you combine an RO with other systems mentioned above, it delivers the level of purity that you will get from bottled water. Not only for residential purposes, but this technology is also considered to be the most effective even for commercial applications requiring high water purity. 

Pure water is a requirement that you can never ignore. residential water filtration systems are almost NEEDED in every home. We already know that there are thousands of different contaminants in water that are not removed in treatment plants. Why ignore the whole problem when the solution is so simple?

The residential water filtration systems that are most effective at removing contaminants are the point-of-use ones. This includes the units that connect right to your faucet or sit under your sink and have their own individual faucet. The reason they are so effective is that the reduced flow rate allows for more time to be treated. You can even get point-of-use filters that attach right to the end of your shower head as well.

Residential water filtration systems that use a multi-stage process tend to remove the highest amount of each contaminant. And with multiple filtering technologies, more types of contaminants will be removed as well.